What Is Line Striping?
laying new or Re-striping Existing Markings And Lines throughout any parking lot area.
Generally used as parking lot markings for stalls and outlining areas of your lot as well as any stenciling or custom work needed to signify proper lot spacing desired to Accommodate your business needs.
The Best line striping and marking Maintenance Schedule To Follow. any Noticeable wear or fading to your parking lot area would constitute rejuvenation or Re-striping for your lot to look as visually appealing as possible.
When should I get Line striping?
You should consider restriping as soon as you notice Any significant worn or fading to your lines or markings.
Will Line Striping make my Parking lot look better?
Absolutely! The New line Striping and stencils will Dramatically increase the overall appearance of your parking lot.
What all types of line striping can be done?
Anything from Outlines, stalls, stencils, as well as any custom marking you may require.
Step 1 - Cleaning Job Site
Remove all debris – This can be done with a broom but sweeping the lot clear of debris is quick and easy with a blower.
Wash Away Stains – Such as fuel stains or gas, oil, And diesel as well as spilled drinks, and so forth.
Scrape Loose Paint – Most times you're line striping over existing markings, so it's important to scrub away any loose flaking paint. A pressure washer can make short work of this.
Step 2 - assess job site pavement
Pothole And Crack Filling – Should always be the first step and is the most important step in looking after your parking area. It is far cheaper to maintain your pavement by repairing it as you go than to face complete repaving in a few years of neglect.
Asphalt Seal Coating – A very close second in importance. Asphalt oxidizes and gets brittle; a fresh seal coat will keep your parking lot healthy and sharp looking.
Step 3 - Line Markings
Choose line paint – we prepare the proper mixture of sealant depending on your pavement and needs.
stencils – we apply the appropriate amount of coatings to ensure longevity and protection of your asphalt.
Reflective Beads – We Prepare The Proper Mixture Of Sealant Depending On Your Pavement And Needs.
Step 4 - Application
plan layout – we prepare the proper mixture of sealant depending on your pavement and needs.
Layout Marking Structure – We Prepare The Proper Mixture Of Sealant Depending On Your Pavement And Needs.
Lay down markings and lines – all the long lines first, and then go back to the beginning to mark the stall lines, after the long lines have dried.
Stencils And Reflective Beads – these require multiple coats to ensure proper setting and layering to achieve a Seamless and visually attractive appearance.
Step 5 - Clean up area
Finishing the job involves cleaning of entire area of Job-site to leave it looking neat and polished.
Check Us Out On Facebook
Line Striping In Action!