Tips For Successful Crack Sealing

Tips For Successful Crack Sealing

Cracks come in different forms. They can be small holes in the surface, which later turn into giant potholes. The reason is: cracks give way to water and dirt to seep under the surface, which subsequently contributes to the deterioration of the pavement. Therefore, it wouldn’t be wrong to say that cracks, either small or big, are the root of all the pavement problems.

However, sealing these cracks when they first appear is the best solution to maintain the high-quality of the asphalt. By doing so, you will not only preserve the aesthetics of the asphalt surface but also retain the pavement from degrading before time.

For expert crack sealing services, click here to hire Asphalt Specialties LLC’s professional asphalt pavers in Twin Falls, ID. We ensure applying high-quality sealers and fillers to provide you with a durable asphalt surface. Our team expertly uses efficient crack seal coating process and techniques to seal the cracks and prevent future cracks too!

Connect to get more insights about our services today!

This blog includes the top four tips to help you successfully seal your asphalt cracks and save you from future maintenance hassles.

1. Determine The Depth of the Damage

Although crack sealing is the most cost-effective and efficient way to repair the surface, it may not be suitable to fix your pavement’s distress. Therefore, you first need to determine a few of the following things to begin the crack sealing process. This includes assessing the type of the crack(s), crack(s) width, vehicle load, and topography issues. 

After knowing all of the above, you can decide the crack sealing techniques, equipment needs, and crew. Moreover, this will also help you in determining how much sealant will be required.

2. Clean and Dry All Cracks

Once all the products and tools are ready, ensure cleaning all cracks and drying them before applying the crack sealant. Otherwise, water, dirt, or other damage-causing elements will affect your repairing process.

For cleaning, you can use a hard-bristled broom or brush or a vacuum to clean the cracked area. You might also require a heat gun to balance the pavement’s temperature with the air temperature, i.e., 40 degrees Fahrenheit and rising. 

3. Use The Correct Sealant

Since several crack sealants are available in the market, you need to choose the most suitable one for your surface. Know that different sealants have different properties that may change by viscosity, climate, and more. Not only this, but you’ll have to consider the sealant lot number and its specifications before buying it.

Next, make sure to follow all the instructions given on the sealant for the best results. In case you are using two sealants, ensure mixing them properly and heating them together to avoid adhesion issues. 

4. Practice Good Techniques 

Lastly, the way you apply the sealant to the crack determines the longevity and efficiency of the surface. Remember that there is no such thing as “the more, the better” when it comes to filling cracks with a sealant.

So, you will have to carefully determine the sealant quantity that you will be covering the crack with. Please note that you cannot repair potholes, wide cracks (of 1.5 inches and larger), and alligator cracks with a crack sealer. You will have to take professional help if your pavement is suffering from any damages mentioned above.

Asphalt Specialties LLC is a professional asphalt maintenance and repair service serving the entire Twin Falls, ID round the clock. We ensure you receive excellent asphalt sealcoating, crack sealing, and line striping services at reasonable rates. Click here to connect with us today!